Effective SARMs you can Count on in your Bulking and Cutting Cycles

sarms for man

Without a doubt, there are SARMs that can be efficient and effective for your bulking and cutting cycles. Determining what you will use, for how long, and how much of it all factor into what you gain with the use of such substances. What can make it confusing is some of the SARMs are valid to use in both of these cycles. They aren’t isolated to just one.

Being well informed about your options for each cycle is important. You need to wrap your head around what is offered and what you can gain before you plan. You don’t want to randomly reach for SARMs for your cycles. Instead, you want to carefully create a plan that allows you to be able to achieve your goals. Find out what works best for what you need and want, and then the rest can all fall into place.

Using SARMs responsibly and correctly in both a bulking and cutting cycle can make a difference in the outcome. It can help you to save money over buying anabolic steroids. It can also help you to avoid serious side effects. Yet they will allow you to make significant gains in both types of cycles.

The Purpose of a Bulking Cycle

The cycle most athletes and bodybuilders are looking forward to is the bulking cycle. This is where the effort goes into getting stronger and creating more lean muscle tissue. The workouts are very difficult and challenging. They strive to help someone see results in a short amount of time. With the use of SARMs, a person may see up to 20 pounds of new lean muscle mass during that cycle. It depends on numerous variables that play a role in the overall outcome.

At the same time, this cycle helps with creating more strength. It can allow someone to lift more and to be able to complete additional reps. They rely on SARMs to offer additional endurance and energy so they can take on these types of workout sessions. It would be almost impossible to do so without a booster or a stack of boosting substances to rely on.

The Purpose of a Cutting Cycle

The purpose of a cutting cycle is to help the muscles that have been created to remain strong and defined. The individual is going to take in drastically fewer calories than they did before. They are trying to get the body to feed on the remaining body fat to use as fuel and energy. The natural process for the body though is to use muscle for fuel when a person isn’t taking in enough calories.

The use of SARMs can get the mind and body to bypass this natural survival instinct of holding on to body fat. It will result in the person being able to further reduce their body fat during the cutting cycle. At the same time, it helps them to preserve the lean muscle mass they have created. One of the huge benefits of SARMs over anabolic steroids for cutting is a person doesn’t have to worry about water retention.

The issue of water retention is very serious and shouldn’t be taken lightly. It can prevent the body from successfully circulating the blood. This causes the heart to work much harder than it should and that can increase the risk of a heart attack or a stroke. Water retention can also make the muscles soft or lumpy rather than smooth and hard.

Recommended SARMs for a Bulking Cycle

Athletes and bodybuilders have to evaluate SARMs to determine what they will add to their stack for a bulking cycle. Such a cycle shouldn’t last for longer than 12 weeks for males and no longer than 8 to 10 weeks for females. A common stack can include:

These three SARMs work in unison in a bulking cycle to help with sizable gains and creating lean muscle mass in a short amount of time. The muscle mass created is going to be lean and dry, allowing it to be very defined. The gains are going to be noticeable very soon and the increase in overall strength is going to be hard to miss.


This is one of the newer SARMs, but one that is in high demand. It is powerful and it can help with bulking up very quickly. It is often a product seasoned athletes rely on during the offseason. It gives them the drive and the kickoff for their ultimate goals they are after. They love the additional strength and energy, and it makes it possible for them to stick to a very difficult schedule during that bulking cycle.

The typical dose of LGD-3303 for bulking is 5 mg to 10 mg per day for women and 10 mg to 20 mg per day for men. It has a short half-life, so it is best to take the total dose and break it up into two doses per day. Take each dose 12 hours apart in order to maintain a constant level of it in the system for the duration of the cycle.

It is recommended for women to use LGD-3303 for up to 8 weeks and for males to use it up to 12 weeks. This is also a SARM you can use alone to really kick off the cycle before you introduce the other substances in the stack.


This product isn’t actually a SARM, but it is extremely similar, and often categorized as such. From the point of view of athletes and bodybuilders, they are going to use it as one due to the value it offers. When MK-677 is in the body, it increases the level of growth hormone.  It helps with adding muscle mass and increasing appetite. It also offers value by keeping your natural testosterone levels up, it isn’t going to suppress them.

The typical dose is 5 mg to 10 mg per day for women and 10 mg to 25 mg per day for men. It can be taken for a period up t0 16 weeks for women and up to 16 weeks for men. It has a half-life of 24 hours, so it can be taken once per day. It should be taken at the same time each day to help regulate the amount of it in the body.


Many users new to taking SARMs start with Ostarine because it is mild. Yet it is one tried and true that those who go through plenty of cycles also return to. They know it is a product they can count on. It helps to promote recovery in less time, and that enables the muscles to grow faster. It also reduces the risk of injuries because it keeps the bones and muscles strong and healthy.

The recommended dose for women is 5 mg to 10 mg per day and 10 mg to 25 mg per day for men. It should be taken once per day, but at the same time each day to help regulate the amount in the body. You want to avoid spikes and dips in those levels. The average cycle is 6 weeks for women and 8 weeks for men.

Recommended SARMs for a Cutting Cycle

The same holds true for a cutting cycle and the use of SARMs. The athlete or bodybuilder has to determine the best products for them to create a stack so they can achieve desired outcomes. The recommended cycle shouldn’t last for more than 12 weeks for males and no longer than 8 to 10 weeks for females. A common stack can include:


In a cutting cycle, Cardarine is often used because it helps to keep energy levels and endurance high. When a person is cutting, chronic fatigue is very common due to the reduced calories. Yet they are still trying to work out and stay pushing the limits with what they do. That isn’t going to happen easily without the use of SARMs like this one that allow for the energy boost to still be there.


During a cutting cycle, LGD-4033 can be very useful with cutting fat. It is best used by someone with 10% or less body fat to begin with. Yet the less a person has, the harder it gets for the body to reduce it even further. This SARM encourages the body to rely on that body fat for energy and fuel with the reduced calories. It plays a role in keeping the muscle mass hard and defined.


This is one of the most efficient and effective SARMs to count on during a cutting cycle. It is very effective when it comes to removing stubborn body fat. It is often a product that you will see used. It may still stimulate appetite, and that creates a mental concern or some users. They have to fight the urge to eat more with it, but they simply can’t in order for cutting to work like it was intended.


Being able to hold on to that lean muscle mass you worked so hard to create is very important. No one wants to see it start to slip away or get softer during a cutting cycle. Taking the SARM Ostarine allows for the muscles to stay strong, defined, and hard during that cycle. It is almost always used by athletes and bodybuilders while cutting for that outcome.


This SARM is often used in order to promote a chiseled appearance and definition lines during a cutting cycle. It is going to play a vital role in creating a very lean overall appearance. It can help reduce body fat in a short amount of time. It is considered to be a mild SARM, but that doesn’t mean it isn’t effective.

These SARMs will help to boost metabolism during the cutting cycle, further promoting the burning of body fat.  They will also help you to have your energy high and maintain stamina, in spite of significantly lowered calorie intake.


Regardless of a bulking cycle or a cutting cycle, you must adhere to the recommended dosing information. It will vary depending on the specific SARM. It will also depend on which cycle you are in. The dose tends to be higher for bulking than for cutting when you are taking about a specific product that can be used for both.

Use the lowest possible dose to get desired benefits. It may surprise you to learn you don’t have to be at the top of that maximum in order to do well with SARMs. Introduce the products slowly so that your body has time to adjust to them and to respond to them. Keeping the dose of such substances lower reduces the risk of side effects.

Always use such products correctly. There are too many reported cases of people abusing them. This isn’t a solution to get the body you want without working hard and eating correctly. In a bulking cycle, the workouts are very different from what you will engage in for a cutting cycle. The food intake for a bulking cycle is 2 or 3 times more than what is consumed in a cutting cycle.

You need solid information and factors you can rely on to help you create your cycles correctly. Being misinformed or just ignoring the information isn’t going to help you. When you go that route, the use of SARMs can be dangerous and the value isn’t going to be what it should be. The products aren’t going to be able to deliver what they were capable of.